Ever seen someone heat pressing designs onto garments and thought – “Wow! That must be so easy!”?

Well, as much as it’s good to be optimistic, we have to tell you that the process is a bit complex, needing careful planning if the results are to be great.

The careful planning we’re talking about here especially concerns the time and temperature of the heat press.

For the transfer to look good, the temperature needs to be set correctly, and the amount of pressure applied needs to be right.

Apart from that, you need to know whether to remove the carrier paper hot or cold.

Deciding on all these factors can be a bit overwhelming particularly when you want the results to be faultless.

But, with this handy heat press temperature setting guide, you don’t need to worry at all. We’re going to look at the correct heat and temperature when applying a heat press to different materials.

Let’s jump in.

Heat Press Time and Temperature Chart For Different Materials

Polyester

One thing to note about polyester is that it doesn’t put up with high heat levels very well. Thus, you want to set a relatively lower temperature of around 270 °F and set the time to just about 10 seconds.

Peel the transfer only when hot.

Vintage

For that old, faded look otherwise known as vintage, use this heat press temperature guidelines:

  • Temperature – 350 °F

  • Time – 10 to 12 seconds

  • Pressure – firm

  • Peel when hot

Stretchy Materials

If the material you’re heat pressing has a lot of stretch, for instance, swimming costume, set the temperature to around 335 °F and apply the heat press for around 12 to 14 seconds. Peel the transfer while cold.

But if you’re looking to print full-color designs, it’s imperative that you follow these guidelines:

  • Temperature – 350 °F

  • Time – 10 to 12 seconds

  • Hot peel

Glitter

Assuming you’re printing a highly textured design and you want to display some glitter, these are the guidelines to follow:

  • Temperature – 350 °F

  • Time – 15 seconds

  • Pressure – firm

  • Peel when hot

Cotton

Cotton is one of the most widely-used fabric because, in fact, 75% of men’s clothing are made of 100% cotton. When applying transfers to a cotton apparel, you need to use high heat levels as shown in these guidelines:

  • Temperature – 380 °F

  • Time – 15 minutes

  • Pressure – medium

  • Peel – when hot

High Quality Digital Prints

If the transfer was digitally printed on transfer paper and your customer needs to graphic to be of very high quality, use these guidelines:

  • Temperature – 305 °F

  • Time – just around 5 minutes

  • Peel – when hot

  • Pressure – medium

  • Multi-Purpose Material

If you’re using multi-purpose material, then you can set the temperature to around 350 °F and set the time to about 10 to 12 seconds.

Glow In The Dark Garments

Perhaps you want to add a little bit of fun in there, and you’re looking to do that by making the designs glow in the dark. In that case, you should apply these guidelines:

  • Temperature: 350 °F

  • Time: 10 to 12 seconds

  • Pressure – firm

  • Peel – when it’s still hot

Reflective Material

Maybe you’re planning to design some safety gear or other materials that have a reflective surface. Use these transfer specifications:

  • Temperature – 305 °F

  • Time – 10 to 12 minutes

  • Pressure – firm

  • Peel – when cold

Stubborn Materials

If you find that the material you’re trying to print is too stubborn and perhaps a few transfers have come off so far, try applying these heat press guidelines:

  • Temperature – 330 °F

  • Time – 15 minutes

  • Pressure – medium

  • Peel – do it while the transfer is hot

Metal-Like Finish

Want you transfer to look metallic on the garments? It seems like a complicated design to pull off, but all you really have to do is use these specifications:

  • Temperature – 320 °F

  • Time – 20 minutes

  • Pressure – medium

  • Peel – let it cool down a bit; peel the transfer when it’s warm.

Graphic Transfer on To A Light Garment

Looking to transfer a photo onto a white or light-colored garment and achieve a great transfer? Here are settings to use:

  • Temperature – 385 °F

  • Time – 25 to 30 minutes

  • Pressure – firm

  • Peel – when hot

Graphic Transfer onto Dark Garments

When you want to transfer an image to a dark-colored apparel, try these guidelines:

  • Temperature – 365 °F

  • Time – 25 minutes

  • Pressure – firm

  • Peel – when hot

Frequently Asked Questions (FAQs)

1. What temperature should I set my heat press to?

It all depends on the sort of fabric you’re printing. Generally, you want to set a heat level of around 350 °F when dealing with light-colored fabrics and a temperature of about 320 °F when dealing with dark-colored fabric. Less than 20 seconds pressing time should be fine.

2. How long does heat transfer vinyl need to be heat pressed?

10 to 15 seconds are enough, but there’s something else you need to know. You need to adjust the temperature to around 305 °F, and prior to applying the heat press, the fabric has got to be preheated for three seconds.

3. What fabrics can I heat press?

Almost all the fabrics you can think of, actually. You can heat press cotton, polyester, nylon, lycra, spandex, leather, and the blends of these materials.

4. What temperature can I heat press glitter vinyl?

You can use glitter vinyl with polyester, cotton, and other fabrics. The first thing to do is cut the material and weed the excess. Once everything is set, apply the glitter vinyl to the apparel using medium pressure, and with a heat range of 300 to 320 °F for around 15 to 20 seconds.

Peel the carrier paper when the transfer is cold, and remember to wait for 24 hours before making the first wash.

Wrapping It Up

There you have it – the basic time and temperature chart for different sorts of fabric. In fact, we believe this guide covers all the situations you can encounter in your heat pressing business.

So, there’s no more guesswork, and you’ll, therefore, work faster. And as you’ll be working with the correct settings, the transfers will be of much better quality.

Though you can use an iron to make the transfers, it would be much better to get a heat press machine.

Why?

With this, you’ll be able to set the correct time, temperature, and pressure more easily and accurately.

Important reminder – be sure to preheat your fabric prior to applying the heat press. This way, making the transfer will be easier.